Endress+Hauser HART Proline t-mass I 300, Руководство по эксплуатации

Страница: 116 / 202

Commissioning Proline t-mass I 300 HART
116 Hauser
Description 3 (17357) →  116
Description 4 (17002) →  116
‣
Adjustment values in use →  117
Parameter overview with brief description
Parameter Description Selection / User interface /
User entry
Factory setting
Activate in-situ adjustment Activate the in-situ adjustment. The points
stored by the user are used for the in-situ
adjustment. • No
• Yes –
Input type reference value Select input type for the reference value. • Off
• Manual
• Current input 1
*
• Current input 2
*
• Current input 3
*
• External value
*
–
Delete values Delete previous adjustment values and
descriptions. • No
• Yes –
Confirm Confirm deletion. • No
• Yes –
Select flow reference Select process variable. This process variable
is used as reference value for the in situ
adjustment. • Mass flow
• Corrected volume flow
• FAD volume flow
*
• Volume flow
–
Stability check Activate stability check. New adjustment
value is only accepted when the
measurement is stable. • No
• Yes –
Actual flow value Shows the actual flow in relation to the
maximum, factory-measured value that is
adapted to the actual process conditions. –2 000 to 2 000 % –
External reference value Shows the external reference value for the in
situ adjustment. Signed floating-point number –
Reference value Enter fixed value as reference value used for
the in situ adjustment. Signed floating-point number –
Apply value Apply the actual value. • No
• Yes –
Status Shows the validity of the actual reference
value. • Passed
• Replaced
• Unstable
• Invalid –
Description 1 Description for in-situ adjustment: e.g.
facility, operator, date. - -
Description 2 Description for in-situ adjustment: e.g.
facility, operator, date. - -
Description 3 Description for in-situ adjustment: e.g.
facility, operator, date. - -
Description 4 Description for in-situ adjustment: e.g.
facility, operator, date. - -
* Visibility depends on order options or device settings