Endress+Hauser HART Proline t-mass I 300, Руководство по эксплуатации

Страница: 104 / 202

Commissioning Proline t-mass I 300 HART
104 Hauser
Totalizer operation mode →  104
Failure mode →  104
Assign gas →  104
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Assign process variable – Select process variable for
totalizer. • Off
• Mass flow
• Corrected volume
flow
• FAD volume flow
*
• Volume flow
• Energy flow
*
• Heat flow
*
–
Unit totalizer 1 to n A process variable is selected
in the
Assign process variable
parameter (→  104) of the
Totalizer 1 to n submenu.
Select process variable totalizer
unit. Unit choose list –
Totalizer operation mode A process variable is selected
in the
Assign process variable
parameter (→  104) of the
Totalizer 1 to n submenu.
Select totalizer calculation
mode. • Net flow total
• Forward flow total
• Reverse flow total –
Failure mode A process variable is selected
in the
Assign process variable
parameter (→  104) of the
Totalizer 1 to n submenu.
Define totalizer behavior in
alarm condition. • Stop
• Actual value
• Last valid value –
Assign gas (Only with order code for
"Application package", option EV
"Second gas group") – Select the gas that the totalizer
uses. This gas is only totalized
when it is currently active
(‘Active gas’ parameter). • Both gases
• Gas
• Second gas • Both gases option
(only with order
code for
"Application
package", option
EV "Second gas
group")
• Gas
* Visibility depends on order options or device settings