Endress+Hauser HART Proline t-mass I 300 Скачать руководство пользователя страница 58

Страница: 58 / 202

Operation options

Proline t-mass I 300 HART

Hauser

2. Enter the access code.

 The -symbol in front of the parameters disappears; all previously write-

protected parameters are now re-enabled.

7.3.12 Enabling and disabling the keypad lock

The keypad lock makes it possible to block access to the entire operating menu via local

operation. As a result, it is no longer possible to navigate through the operating menu or

change the values of individual parameters. Users can only read the measured values on

the operational display.
The keypad lock is switched on and off via the context menu.

Switching on the keypad lock

The keypad lock is switched on automatically:

• If the device has not been operated via the display for > 1 minute.

• Each time the device is restarted.

To activate the keylock manually:

1. The device is in the measured value display.

Press the  and  keys for 3 seconds.
 A context menu appears.

2. In the context menu select the

Keylock on

option.

 The keypad lock is switched on.

If the user attempts to access the operating menu while the keypad lock is active, the

Keylock on

message appears.

Switching off the keypad lock

‣

The keypad lock is switched on.
Press the  and  keys for 3 seconds.
 The keypad lock is switched off.

7.4

Access to the operating menu via the Web browser

7.4.1

Function scope

Thanks to the integrated Web server, the device can be operated and configured via a Web

browser and via a service interface (CDI-RJ45) or via a WLAN interface. The structure of

the operating menu is the same as for the local display. In addition to the measured values,

device status information is also displayed, allowing users to monitor the status of the

device. Furthermore the device data can be managed and the network parameters can be

configured.
A device that has a WLAN interface (can be ordered as an option) is required for the

WLAN connection: order code for "Display; operation", option G "4-line, illuminated; touch

c WLAN". The device acts as an Access Point and enables communication by

computer or a mobile handheld terminal.

For additional information on the Web server, refer to the Special Documentation for

the device

Содержание HART Proline t-mass I 300











































































































































































































Результаты поиска

Содержание HART Proline t-mass I 300

Отзывы:

Похожие инструкции для HART Proline t-mass I 300

Бренды по названию

Популярные бренды

Endress+Hauser HART Proline t-mass I 300, Руководство по эксплуатации

Результаты поиска

Содержание HART Proline t-mass I 300

Отзывы:

Похожие инструкции для HART Proline t-mass I 300

Бренды по названию

Популярные бренды