Endress+Hauser HART Proline t-mass I 300, Руководство по эксплуатации

Страница: 84 / 202

Commissioning Proline t-mass I 300 HART
84 Hauser
Duct height →  84
Duct width →  84
Parameter overview with brief description
Parameter Prerequisite Description Selection / User entry
Installation direction – Set sign of flow direction to match the
direction of the arrow on the sensor. • Flow in arrow direction
• Flow against arrow
direction
Installation factor – Enter factor to compensate the
mounting-related measurement error. 0.01 to 100.0
Pipe shape Only available with t-mass I. Select the shape of the pipe. • Circular
• Rectangular
Pipe inner diameter Only available with t-mass I. Enter the internal diameter of a circular
pipe. 0.050 to 5 m
Duct height Only available with t-mass I. Enter inner duct height. Duct height
and sensor shaft are parallel. 0.050 to 5 m
Duct width Only available with t-mass I. Enter inner duct width. The duct width
is vertical to the sensor shaft. 0.050 to 5 m
9.4.5 Configuring the status input
The Status input submenu guides the user systematically through all the parameters that
have to be set for configuring the status input.
Navigation
"Setup" menu → Status input
‣
Status input 1 to n
Assign status input
→  85
Terminal number →  85
Active level →  85
Terminal number →  85
Response time status input →  85
Terminal number
→  85