Endress+Hauser HART Proline Promass 83, Руководство по эксплуатации

Страница: 92 / 148

Troubleshooting Proline Promass 83
92 Hauser
661
to
664 S: SIM. CURR. IN n
!: # 661 to 664 C Simulation current input active. Switch off simulation.
671
to
674 S: SIM. STAT IN n
!: # 671 to 674 C Simulation status input active. Switch off simulation.
691 S: SIM. FAILSAFE
!: # 691 C Simulation of response to error
(outputs) active. Switch off simulation.
692 S: SIM. MEASURAND
!: # 692 C Simulation of measuring variables (e.g.
mass flow). Switch off simulation.
698 S: DEV. TEST AKT.
!: # 698 C The measuring device is being checked
on site via the test and simulation
device. -
No. # 8xx
→
Other error messages with so
t
ware options (Coriolis fl owmeter)
800 S: M. FL. DEV. LIMIT
!: # 800 S
1)
Advanced Diagnostics: The mass flow is
outside the limit value, set in the
corresponding diagnosis function. -
801 S: DENS. DEV. LIMIT
!: # 801 S
1)
Advanced Diagnostics: The density is
outside the limit value, set in the
corresponding diagnosis function. -
802 S: REF. D. DEV. LIM.
!: # 802 S
1)
Advanced Diagnostics: The reference
density is outside the limit value, set in
the corresponding diagnosis function. -
803 S: TEMP. DEV. LIMIT
!: # 803 S
1)
Advanced Diagnostics: The temperature
is outside the limit value, set in the
corresponding diagnosis function. -
804 S: T. DAMP DEV. LIM
!: # 804 S
1)
Advanced Diagnostics: The tube
damping is outside the limit value, set in
the corresponding diagnosis function. -
805 S: E.D. SEN. DEV. LIM
!: # 805 S
1)
Advanced Diagnostics: The
electrodynamic sensor is outside the
limit value, set in the corresponding
diagnosis function. -
806 S: F. FLUCT. DEV. LI
!: # 806 S
1)
Advanced Diagnostics: The fluctuation
of the operating frequency is outside
the limit value set in the corresponding
diagnosis functions. -
807 S: TD FLUCT. DEV. LI
!: # 807 S
1)
Advanced Diagnostics: The fluctuation
of the pipe damping is outside the limit
value set in the corresponding diagnosis
functions. -
1) Status signal ist changeable
No. Error message / Type Status signals
(from the
factory,
only HART 7)
Cause Remedy (spare part
→ 
97)