Endress+Hauser HART Proline Promass 83, Руководство по эксплуатации

Страница: 51 / 148

Proline Promass 83 Operation
Hauser 51
15-7 631
Simulation pulse output active
16-0 632
16-1 633
16-2 634
16-3 641
Simulation status output active
16-4 642
16-5 643
16-6 644
16-7 651
Simulation relay output active
17-0 652
17-1 653
17-2 654
17-3 661
Simulation current input active
17-4 662
17-5 663
17-6 664
17-7 671
Simulation status input active
18-0 672
18-1 673
18-2 674
18-3 691 Simulation of response to error (outputs) active
18-4 692 Simulation of volume flow active
19-0 700 The process fluid density is outside the upper or lower limit values set in the
"EPD" function
19-1 701 The maximum current value for the measuring tube exciter coils has been
reached,
since certain process fluid characteristics are extreme.
19-2 702 Frequency control is not stable, due to inhomogeneous fluid.
19-3 703 NOISE LIM. CH0
Overdriving of the internal analog to digital converter.
A continuation of the measurement is still possible!
19-4 704 NOISE LIM. CH1
Overdriving of the internal analog to digital converter.
A continuation of the measurement is still possible!
19-5 705 The electronics' measuring range will be exceeded. The mass flow is too
high.
20-5 731 The zero point adjustment is not possible or has been canceled.
22-4 61 F-Chip is faulty or not plugged into the I/O board.
24-5 363 Current input:
The actual value for the current lies outside the set limits.
Byte-bit Error No. Short error description
→ 
87.