Endress+Hauser HART Proline Promass 83, Руководство по эксплуатации

Страница: 54 / 148

Operation Proline Promass 83
54 Hauser
17-0 802 Advanced Diagnostics:
The reference density is outside the limit value, set in the corresponding
diagnosis function.
17-1 803 Advanced Diagnostics:
The temperature is outside the limit value, set in the corresponding diagnosis
function.
17-2 804 Advanced Diagnostics:
The tube damping is outside the limit value, set in the corresponding
diagnosis function.
17-3 805 Advanced Diagnostics:
The electrodynamic sensor is outside the limit value, set in the corresponding
diagnosis function.
17-4 731 The zero point adjustment is not possible or has been canceled.
17-5 471 The maximum permitted batching time was exceeded.
17-6 472 Under batching: The minimum quantity was not reached.
Over batching: The maximum permitted batching quantity was exceeded.
17-7 473 The predefined batch quantity point was exceeded.End of filling process
approaching
18-0 571 Batching is started and active (valves are open)
18-1 572 Batching has been interrupted (valves are closed)
18-2 339
Flow buffer:
The temporarily buffered flow portions (measuring mode for pulsating flow)
could not be cleared or output within 60 seconds.
18-3 340
18-4 341
18-5 342
18-6 343
Frequency buffer:
The temporarily buffered flow portions (measuring mode for pulsating flow)
could not be cleared or output within 60 seconds.
18-7 344
19-0 345
19-1 346
19-2 347
Pulse buffer:
The temporarily buffered flow portions (measuring mode for pulsating flow)
could not be cleared or output within 60 seconds.
19-3 348
19-4 349
19-5 350
19-6 121 I/O board and the amplifier board (software versions) are not compatible.
19-7 061 F-Chip is faulty or not plugged into the I/O board.
20-0 363 Current input:
The actual value for the current lies outside the set limits.
20-4 698 The measuring device is being checked on site via the test and simulation
device.
20-5 474 Maximum flow value entered is overshot.
20-6 806 Advanced Diagnostics:
The fluctuation of the operating frequency is outside the limit value set in the
corresponding diagnosis functions.
20-7 807 Advanced Diagnostics:
The fluctuation of the pipe damping is outside the limit value set in the
corresponding diagnosis functions.
Byte-bit Error No. Short error description
→ 
87.