Endress+Hauser HART Proline Promass 83, Руководство по эксплуатации

Страница: 22 / 148

Installation Proline Promass 83
22 Hauser
3.3.2 Installing the wall-mount housing
There are various ways of installing the wall-mount housing:
• Mounted directly on the wall
• Installation in control panel (separate mounting set, accessories)
→
23
• Pipe mounting (separate mounting set, accessories)
→
23
"
Caution!
• Make sure that ambient temperature does not go beyond the permissible range
(– 20 to +60 °C (–4 to + °140 F), optional – 40 to +60 °C (–40 to +140 °F)). Install the device
in a shady location. Avoid direct sunlight.
• Always install the wall-mount housing in such a way that the cable entries are pointing
down.
Mounted directly on the wall
1. Drill the holes as illustrated in the diagram.
2. Remove the cover of the connection compartment (a).
3. Push the two securing screws (b) through the appropriate bores (c) in the housing.
– Securing screws (M6): max. Ø 6.5 mm (0.26")
– Screw head: max. Ø 10.5 mm (0.41")
4. Secure the transmitter housing to the wall as indicated.
5. Screw the cover of the connection compartment (a) firmly onto the housing.
a0001130
Fig. 17: Mounted directly on the wall
a
b
c
90 (3.54)
35 (1.38)
192 (7.56)
81.5 (3.2)