Endress+Hauser HART Proline Promass 83, Руководство по эксплуатации

Страница: 53 / 148

Proline Promass 83 Operation
Hauser 53
4-6 621
Simulation frequency output active
4-7 622
5-0 623
5-1 624
5-2 631
Simulation pulse output active
5-3 632
5-4 633
5-5 634
5-6 641
Simulation status output active
5-7 642
10-0 351
Current output:
The actual value for the flow lies outside the set limits.
10-1 352
10-2 353
10-3 354
?13-0 611
Simulation current output active
13-1 612
13-2 613
13-3 614
14-0 643
Simulation status output active
14-1 644
14-2 651
Simulation relay output active
14-3 652
14-4 653
14-5 654
14-6 661 Simulation current input active
15-2 671
Simulation status input active
15-3 672
15-4 673
15-5 674
15-6 691 Simulation of response to error (outputs) active
15-7 692 Simulation of volume flow active
16-0 700 The process fluid density is outside the upper or lower limit values set in the
"EPD" function
16-1 701 The maximum current value for the measuring tube exciter coils has been
reached,
since certain process fluid characteristics are extreme.
16-2 702 Frequency control is not stable, due to inhomogeneous fluid.
16-3 703 Overdriving of the internal analog to digital converter.
16-4 704 A continuation of the measurement is still possible!
16-5 705 The electronics' measuring range will be exceeded. The mass flow is too high.
16-6 800 Advanced Diagnostics:
The mass flow is outside the limit value, set in the corresponding diagnosis
function
16-7 801 Advanced Diagnostics:
The density is outside the limit value, set in the corresponding diagnosis
function.
Byte-bit Error No. Short error description
→ 
87.