DTM Print CX86e, Руководство пользователя

Страница: 61 / 214

61
Item Setting Description
TIMEOUT NET 0 SEC
5 SEC ~
90 SEC ~
290 SEC
295 SEC
300 SEC Sets the time that the network ports are left open when an
operation finishes.
JAM RECOVERY ON
OFF Sets whether to print the page where a paper jam oc-
curred again.
When this is set to OFF, the remaining pages are not print-
ed, including the page where the paper jam occurred.
ERROR REPORT ON
OFF Sets whether to print an error report when an error occurs
in the printer.
HEX DUMP EXECUTE Prints a hex dump of the received data as a QR code.
When the power of the printer is turned off, the printer
returns to the regular print mode.
Communication cannot be performed with the status
monitor, etc. while printing in the dump format.
PRINT ADJUST POSITION
ADJUST
X ADJUST 0.00 MM
+0.25 MM ~
+2.00 MM
-2.00 MM ~
-0.25 MM Corrects the position of the entire print image in the direc-
tion perpendicular to the feed direction of the paper. Set
in increments of 0.25 mm.
Y ADJUST 0.00 MM
+0.25 MM ~
+2.00 MM
-2.00 MM ~
-0.25 MM Corrects the position of the entire print image in the feed
direction of the paper. Set in increments of 0.25 mm.
PAPER
COLOR SET
0, +1, +2, -2, -1 Performs fine adjustment when faint white dots or other
visual problems occur in the print results.
Lower the setting when there are faint white dots occur
and raise the setting when high density areas become
lighter.
SMR SETTING YELLOW 0, +1, +2, +3, -3, -2, -1 Corrects uneven printing due to differences in the print
density/print frequency or temperature/humidity. Change
the yellow setting when the image is uneven.
MAGENTA 0, +1, +2, +3, -3, -2, -1 Corrects uneven printing due to differences in the print
density/print frequency or temperature/humidity. Change
the magenta setting when the image is uneven.
CYAN 0, +1, +2, +3, -3, -2, -1 Corrects uneven printing due to differences in the print
density/print frequency or temperature/humidity. Change
the cyan setting when the image is uneven.