DTM Print CX86e, Руководство пользователя

Страница: 86 / 214

86
Loading Paper
Set the roll paper its side on a flat surface so that it dose not roll or fall. Dropping a roll paper may cause injury.
—
Be careful not to soil the printing surface of the roll paper. The print quality may deteriorate.
—
It is recommended to wear and handle clean cloth gloves etc. to protect the printing surface of the roll paper.
—
Align the edges of the paper on both ends of the roll paper. This may cause paper feed problems.
Before loading the roll paper, remove any paper from the paper inlet unit.
—
Do not load the roll paper in the opposite direction.
—
If a feeding problem occurs, reload the roll paper.
—
When the roll paper is in one of the following conditions, cut off the edge of the paper with scissors before
loading it. This may cause paper feed problems and affect the printing quality.
The leading edge of the roll paper is damaged. Adhesive tape, glue or dirt is sticking to the roll paper.
The roll paper is wrinkled. The corners of the roll paper are folded.
The roll paper curls in the opposite direction to the
rolling direction.
The edge of the roll paper is dented.