DTM Print CX86e, Руководство пользователя

Страница: 19 / 214

19
Installation
Installation Environment
Install the machine in the following environment.
X
Ambient temperature: 10°C to 32°C
X Ambient humidity: 20% to 80% RH (relative humidity)
X Maximum wet bulb temperature: 25°C
—
Use care to prevent condensation. It may cause a malfunction.
—
If you install the machine in a location whose ambient humidity is 30% RH or below, use a humidifier or anti-
static mat.
—
Depending on the installation environment, the machine may emit bothering operation noise. If the noise
bothers you, we suggest the machine be installed in a location away from you or in another room.
—
Do not install the machine in a location subject to high temperatures or in a location near fire.
—
Do not install the machine in a location where chemical reactions may occur (such as a laboratory).
—
Do not install the machine near alcohol, thinners, or other flammable solvents.
—
Do not install the machine in a location within the reach of small children.
—
Do not install the machine in an unstable location (such as on an unsteady stand or slanted location).
—
Do not install the machine in a location subject to high level of humidity, dust, or direct sunlight.
—
Do not install the machine in an environment exposed to salty air or corrosive gas.
—
Do not install the machine in a location subject to much vibration.
—
Do not install the machine in a location where its vent hole is blocked.
—
Do not install the machine directly on a thick rug or carpet.
—
Do not install the machine in a location with bad circulation and ventilation such as a closed room.
—
Make sure to ventilate the room if you use the machine in a small room continuously for an extended period of time.
—
Install this machine away from a source that emits strong magnetic fields or noise.
—
Install this machine away from a monitor or television.
Using the Machine