DTM Print CX86e, Руководство пользователя

Страница: 152 / 214

152
Cause Remedy Reference
[Wireless (AP Mode)]
A wireless device (such as a com-
puter, tablet, or smartphone) is not
connected to the machine.
Check whether [WIRELESS
(AP MODE)] is set to [ENABLE] in the machine.
Check the SSID/password of the machine, and
perform manual setup.
Perform connection in a location near the ma-
chine with good visibility.
A maximum of four devices can be connected to
the machine with the wireless (AP mode). Addi-
tional devices cannot be connected. Try connect-
ing again after disconnecting a device.
Connecting via Wireless LAN
The IP addresses are incorrect. Check whether the IP address of the machine
matches the IP address of the machine set in the
computer.
Check whether the IP address is the same as
another device.
Check whether the IP address, subnet mask, and
gateway address are correct.
Checking Information About the
Machine
The WSD port is being used. Change the destination port for printing to the
standard TCP/IP port.
-
USB Connection Problems
Cause Remedy Reference
The cable standard does not match. Use a USB cable that conforms to the
USB 2.0 standard.
-
A USB hub is being used. Directly connect the machine to the
computer.
Connecting a USB Cable
The printer driver is not installed
correctly.
Reinstall the printer driver.
Installing the Printer Driver to a
Computer