DTM Print CX86e, Руководство пользователя

Страница: 36 / 214

36
—
Press OK button when [IP ADDRESS SET] is displayed.
—
Press ∧ button or ∨ button on the operator panel to select [AUTO] or [MANUAL].
If [MANUAL] is selected, manually input the IPv4 Address, Subnet Mask and Gateway Address.
Directly Connecting to the Machine (AP Mode)
Automatic Setup (Push Button)
If the wireless terminal (computer, tablet, smartphone, etc.) supports «WPS-PBC» (push button), then you can use the
WPS button to connect via wireless (AP mode).
Follow the procedure below to connect.
—
Confirm the position of the WPS button in the user’s manual provided with the wireless terminal (computer,
tablet, smartphone, etc.).
—
Turn on the printer.
When [SETUP WIRELESS?] appears, select [NO].
—
Press ∧ button or ∨ button on the operator panel to display [WIRELESS (AP MODE) SETTING], and then press the
OK button.
—
Enter the Admin password, and then press the OK button.
X The default password is 999999.
—
Select [ENABLE], and then press the OK button.
—
Press ∧ button or ∨ button on the operator panel to display [AUTOMATIC SETUP (PUSHBUTTON)], and then
press the OK button.
—
Select YES, and then press the OK button.
—
Start WPS-PBC (push button) on the wireless terminal (computer, tablet, smartphone, etc.).
Once the setup completion screen is displayed, it indicates that the wireless LAN setup has completed.
Using Both a Wired LAN and Wireless LAN Connection
The machine can use both a wired LAN and wireless LAN connection at the same time. The available combinations
are indicated in the table below
—
Wireless LAN (infrastructure) and wireless LAN (AP mode) cannot be enabled at the same time.
—
When wired LAN and wireless LAN are connected to the same subnet, communication may become unstable.
Yes: Enabled, No: Disabled