DTM Print CX86e Скачать руководство пользователя страница 132

Страница: 132 / 214

132

Cleaning the Machine

Cleaning the Surface of the Machine

Turn off the machine.

For information on turning off the machine, refer to “Turning Off the Machine”.

Wipe the surface of the machine with a cloth that has been moistened with water or neutral detergent and

squeezed well.

Wipe the surface of the machine with a dry soft cloth.

Cleaning the LED Head

Clean the LED head if white lines or black lines appear, images are faded, or the periphery of letters are smudged in
the printouts.

Do not use solvents, such as methyl alcohol or thinners. They may damage the LED head.

Do not expose the image drum unit to direct sunlight or strong light (approximately 1,500 lux or more). When

leaving the image drum unit under room lighting for five minutes or more or leaving the top cover open, cover it

with a black cloth or paper to prevent it from being exposed to light.

Insert your finger into the recess on the top of the machine and pull up the lever.

Содержание CX86e






















































































































































































































Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды

DTM Print CX86e, Руководство пользователя

Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды