DTM Print CX86e, Руководство пользователя

Страница: 185 / 214

185
(preshared key)” on the [Authentication Method] screen and enter the preshared key.
—
Click [Complete].
—
Click [OK] in the IP security policy properties window.
—
Select the new IP security policy in the [Local Security Policy] window.
—
Select [Assign] in the [Action] menu.
—
Confirm that [Yes] is displayed for the [Policy Assigned] of the new IP security policy.
—
Click [X] in the [Local Security Policy] window.
Using the IP Address Access Control Function (IP Filter)
IP addresses can be used to control access to the machine. You can configure whether to allow printing or setting
from the specified IP address. IP filtering is disabled by default.
—
Make sure to specify the correct IP address. If an incorrect IP address is specified, the machine will become unable
to be accessed using the IP protocol.
—
If IP filtering is enabled, access to hosts not specified in this setting is refused.
Open the Web page of this machine.
—
For information on starting the Web page, refer to “Starting the Web Page”.
Log in as the administrator.
Select [Admin Setup].
Select [Network] > [Security] > [IP Filtering].
Follow the on-screen instructions to configure the detailed settings.
—
If nothing is registered in [Administrator’s IP Address to Register], the machine may become unable to be ac-
cessed, depending on the specified range of IP addresses.
—
If you are using a proxy server, the IP address of the host used may not match [Your Current Local Host/Proxy IP
Address].
Click [Submit].
X The new setting is enabled after the network function of the machine is restarted.
—
Only IPv4 can be used for IP filtering.