DTM Print CX86e Скачать руководство пользователя страница 30

Страница: 30 / 214

Turning On or Off the Machine

About the Power Supply

Ensure the following conditions for the power supply.

CX86e: 110 to 127V AC (Range 99 to 140V AC)

CX86e: 220 to 240V AC (Range 198 to 264V AC)

Power frequency: 50/60 Hz ± 2%

If the power supply is unstable, use a voltage regulator. The maximum power consumption of the machine is

650W. Check that the power supply is sufficient. Operation is not guaranteed if an uninterruptible power supply (UPS)

or inverter is used. Do not use an uninterruptible power supply (UPS) or inverter.

Be sure to turn off the machine before connecting and disconnecting the power cord and the ground wire.

Be sure to connect the ground wire to the designated ground terminal.

If the machine cannot be grounded, contact your dealer.

Be sure not to connect the ground wire to a water pipe, a gas pipe, the ground terminal of a telephone line, or a

lightning rod.

Be sure to connect the ground wire before connecting the power cord to the outlet.

Also, be sure to unplug the power cord from the outlet before disconnecting the ground wire.

Be sure to hold the power plug when plugging in or unplugging the power cord.

Be sure to insert the power cord fully into the power outlet.

Do not plug in or unplug the power cord with wet hands.

Install the power cord in a location where users cannot step on it, and do not place any object on the power cord.

Do not bundle or tie the power cord

Do not use a damaged power cord.

Do not overload the outlet.

Do not connect the power cords of this machine and other electric products to the same outlet. If the power cord

of this machine is connected to the same outlet as other electric products, especially an air conditioner, copier,

or shredder, this machine may malfunction due to electrical noise. If you have to connect the power cord of this

machine to the same outlet as other products, use a commercially available noise filter or noise cut transformer.

Use the power cord included in this machine, and plug the cord directly into the outlet. Do not use the power

cords of other products for this machine.

Do not use an extension cord. If you have to use an extension cord, use a cord rated 10A or higher.

If you use an extension cord, this machine may not work properly due to AC voltage drop.

Do not turn off this machine or unplug the power cord while printing.

If you do not use this machine for an extended period of time at occasions such as holidays or trips, unplug the

power cord from the outlet.

Do not use the power cord included in this machine for other products.

Содержание CX86e






















































































































































































































Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды

DTM Print CX86e, Руководство пользователя

Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды