DTM Print CX86e Скачать руководство пользователя страница 13

Страница: 13 / 214

Guarantee

• DTM Print GmbH and its licensers do not guarantee anything regarding the software, including the following.That

using the software will enable the customer to obtain the desired performance or results. That the software is free

from defects. That the software does not violate the rights of third parties. That the software is fit for a specific

purpose.

• The software may be modified or changed without notice.

Limited Liability

• DTM Print GmbH and its licensers will not be held responsible for any direct, indirect, or derivative damages or

losses caused by the software, even if DTM Print GmbH was aware of the possible of such damages occurring,

even if the claim for those damages is based on an illegal act (including, but not limited to negligence), or based

on any other legal grounds. Furthermore, DTM Print GmbH and its licensers will also not be held responsible for

any claims made by third parties caused by the software or related to the software.

Applicable Law

The license agreement for the software is based on Japanese law, including the formation of this agreement.

Validity of This Agreement

If part of this agreement is deemed invalid and not legally binding, this will not affect the other parts of this agree-

ment, and those other parts will remain valid and legally binding.

Export Control

The software may not be exported to countries prohibited by the export control laws of Japan and the United States

or other related laws and regulations, and may also not be used in a way that is prohibited by any law or regulation.

The customer agrees to not export or reexport the software or products created from the software without obtaining

permission from the government of the United States and Japan. If the customer violates this clause, this agreement

is terminated automatically.

Содержание CX86e






















































































































































































































Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды

DTM Print CX86e, Руководство пользователя

Результаты поиска

Содержание CX86e

Отзывы:

Похожие инструкции для CX86e

Бренды по названию

Популярные бренды