DTM Print CX86e, Руководство пользователя

Страница: 89 / 214

89
Remove the paper temporarily, and close the feeder cover.
Insert the paper into the inlet until it stops.
X The paper is automatically loaded.
Feeding the Paper
Feeding is performed for the paper set in the machine according to the machine settings.
Execute feeding in the following cases. Printing may not be able to be performed correctly unless feeding is per-
formed.
—
When paper is set in the machine again because it had run out, etc.
—
When paper was cut at the appropriate position because of a paper jam, etc.
—
When the cut position setting is changed
—
When the tip of the paper is dirty, performing paper feeding to cut off the dirty part with the paper still loaded in the
machine.
When the paper to print on has been changed to another paper type, execute sensor calibration.
• Confirm that paper is loaded in the machine.
• Confirm that [READY TO PRINT] is displayed on the machine.