Dell PowerConnect 3500 Series Скачать руководство пользователя страница 64

Страница: 64 / 538

Command Modes

enable password

Sets a local password to control access to normal and privilege levels.

end

Ends the current configuration session and returns to the previous
command mode.

file-system logging

Enables logging file system events.

gvrp enable (Global)

Enables GVRP globally.

hostname

Specifies or modifies the device host name.

interface ethernet

Enters the interface configuration mode to configure an Ethernet
type interface.

interface port-channel

Enters the interface configuration mode of a specific port-channel.

interface range ethernet

Enters the interface configuration mode to configure multiple
ethernet type interfaces.

interface range port-channel

Enters the interface configuration mode to configure multiple port-
channels.

interface range vlan

Enters the interface configuration mode to configure multiple
VLANs.

interface vlan

Enters the interface configuration (VLAN) mode.

ip access-list

Creates Layer 2 ACLs.

ip access-list

Creates Layer 2 ACLs.

ip address

Sets an IP address.

ip default-gateway

Defines a default gateway.

ip dhcp snooping

Globally enables DHCP snooping.

ip dhcp snooping database

Configures the DHCP snooping binding file.

ip dhcp snooping database
update-freq

Configures the update frequency of the DHCP snooping binding file.

ip dhcp snooping information
option allowed-untrusted

Configures a switch to accept DHCP packets with option-82
information from an untrusted port.

ip dhcp snooping trust

Configures a port as trusted for DHCP snooping purposes.

ip dhcp snooping verify

Configures a switch to accept DHCP packets with option-82
information from an untrusted port.

ip dhcp snooping vlan

Enables DHCP snooping on a VLAN.

ip domain-lookup

Enables the IP Domain Naming System (DNS)-based host name-to-
address translation.

ip domain-name

Defines a default domain name, that the software uses to complete
unqualified host names.

ip host

Defines static host name-to-address mapping in the host cache.

book.book Page 64 Thursday, December 18, 2008 7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerConnect 3500 Series

Отзывы:

Бренды по названию

Популярные бренды

Dell PowerConnect 3500 Series, Справочное руководство CLI

Результаты поиска

Содержание PowerConnect 3500 Series

Отзывы:

Бренды по названию

Популярные бренды