manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 128

128

Clock

Default Configuration

Summer time is disabled.

offset — 

Default is 60 minutes.

acronym

 — If unspecified default to the timezone acronym. 

If the timezone has not been defined, the default is UTC.

Command Mode

Global Configuration mode.

User Guidelines

•

In both the 

date

 and 

recurring

 forms of the command, the first part of the command specifies when 

summer time begins, and the second part specifies when it ends. All times are relative to the local time 
zone. The start time is relative to standard time. The end time is relative to summer time. If the 
starting month is chronologically after the ending month, the system assumes that you are in the 
southern hemisphere.

•

USA rule for daylight saving time:

•

Start: Second Sunday in March 

•

End: First Sunday in November 

•

Time: 2 am local time

•

EU rule for daylight saving time:

•

Start: Last Sunday in March 

•

End: Last Sunday in October 

•

Time: 1.00 am (01:00)

Examples

The following example sets summer time starting on the first Sunday in 

March

 at 2 am and finishing on 

the first Sunday in 

November

 at 2 am.

sntp authentication-key

The 

sntp authentication-key

 Global Configuration mode command defines an authentication key for 

Simple Network Time Protocol (SNTP). Use the 

no

 form of this command to remove the authentication 

key for SNTP.

Console(config)# 

clock summer-time recurring first sun mrch

 2:00 

first sun nov

 2:00

book.book  Page 128  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды