manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 325

RMON Commands

325

The following table describes significant fields shown above:

Console> 

show rmon history

 1 

other

Sample Set: 1

Owner: Me

Interface: 1/e1

Interval: 1800

Requested samples: 50

Granted samples: 50

Maximum table size: 500

Time

Dropped

Collisions

--------------------

--------

----------

Jan 18 2002 21:57:00

3

0

Jan 18 2002 21:57:30

3

0

Field

Description 

Time

Date and Time the entry is recorded.

Octets

The total number of octets of data (including those in bad packets) received on the 
network (excluding framing bits but including FCS octets).

Packets

The number of packets (including bad packets) received during this sampling interval.

Broadcast

The number of good packets received during this sampling interval that were directed to 
the Broadcast address.

Multicast

The number of good packets received during this sampling interval that were directed to 
a Multicast address. This number does not include packets addressed to the Broadcast 
address.

Util

The best estimate of the mean physical layer network utilization on this interface during 
this sampling interval, in hundredths of a percent.

CRC Align

The number of packets received during this sampling interval that had a length 
(excluding framing bits but including FCS octets) between 64 and 1632 octets, inclusive, 
but had either a bad Frame Check Sequence (FCS) with an integral number of octets 
(FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

Undersize

The number of packets received during this sampling interval less than 64 octets long 
(excluding framing bits but including FCS octets) and were otherwise well formed.

Oversize

The number of packets received during this sampling interval longer than 1632 octets 
(excluding framing bits but including FCS octets) but were otherwise well formed.

book.book  Page 325  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды