manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 471

VLAN Commands

471

interface range vlan

The 

interface range vlan 

Global Configuration mode command enables simultaneously configuring 

multiple VLANs.

Syntax

•

interface range vlan

 {

vlan-range 

|

 

all

}

•

vlan-range

 — Specifies a list of VLAN IDs to be added. Separate non-consecutive VLAN IDs with 

a comma and no spaces; a hyphen designates a range of IDs.

•

all

 — All existing static VLANs.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Commands under the interface range context are executed independently on each interface in the 
range. If the command returns an error on one of the interfaces, an error message is displayed and 
execution of the command continues on the other interfaces.

•

The following commands are not supported with the 

interface range vlan 

command: 

switchport access 

vlan, private-vlan community, private-vlan isolated and switchport protected

.

Example

The following example groups VLANs 221, 228 and 889 to receive the same command.

name

The 

name 

Interface Configuration mode command adds a name to a VLAN. Use the 

no

 form of this 

command to remove the VLAN name. 

Syntax

•

name 

string

•

no name

•

string

 — Unique name to be associated with this VLAN. (Range: 1 - 32 characters)

Console(config)# 

interface range vlan

 221-228,889

Console(config-if)#

book.book  Page 471  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды