manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 444

444

TIC Commands

Default Configuration

No required number of password changes before reusing a password.

Command Mode

Global Configuration mode.

User Guidelines

•

Relevant to local user passwords, line passwords, and enable passwords.

•

Password history is not checked during the configuration download.

•

Password history is saved even if the feature is disabled.

•

A user’s password history is saved as long as the user is defined.

•

If the user enters a password that is identical to the previously used one, the password is not included 
in the password history count. This is required to enable the user to modify privilege level or aging, 
without having to change passwords.

Example

The following example configures the required number of password changes before a password can be 
reused to 3.

passwords history hold-time

The 

passwords history hold-time 

Global Configuration mode command configures the number of days a 

password is relevant for tracking its password history. Use the 

no

 form of this command to return to the 

default configuration.

Syntax

•

passwords history hold-time 

days

•

no passwords hold-time

•

days — 

Number of days a password is relevant for tracking its password history. (Range: 1 - 365) 

Default Configuration

Disabled.

Command Mode

Global Configuration mode.

Console(config)# 

passwords history

 3

book.book  Page 444  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды