manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 455

Tunnel

455

Command Mode

Interface Tunnel Configuration mode.

User Guidelines

•

The 

ipv6 tunnel routers-dns

 command determines the string that the host uses for automatic tunnel 

router lookup in IPv4 DNS procedure. By default, the string ‘ISATAP’  is used for the corresponding 
automatic tunnel types. 

•

Per tunnel only one string can represent the automatic tunnel router name. Using this command 
overwrites the existing entry.

Example

The following example configures a global string "Dell_Tunnel_Router" to represent a specific automatic 
tunnel router domain name..

tunnel source

The 

tunnel source

 Interface Tunnel Configuration 

mode 

command sets the local (source) tunnel 

interface IPv4 address. Use the 

no

 form to delete the tunnel local address.

Syntax

•

tunnel source

 { 

auto

 | 

ip-address

 

ipv4-address

 | 

interface

 }

•

no tunnel source

•

auto

 — The system minimum IPv4 address is used as the source address for packets sent on the 

tunnel  interface. If the IPv4 address is changed then the local address of the tunnel interface is 
also changed.

•

ip4-address

 — Pv4 address to use as the source address for packets sent on the tunnel interface. 

The tunnel interface local address is not changed when the IPv4 address is moved to another 
interface.

•

interface

 — Interface which the minimum IPv4 address is used as the source address for packets 

sent on the tunnel interface. If the minimum IPv4 address is removed from the interface or moved 
to another interface then the next minimum IPv4 address is chosen as the local IPv4 address. The 
parameter has the following format: 

ethernet

 

interface-number

 | 

vlan

 

vlan-id

 | 

port-channel

 

number.

Default Configuration

No source address is defined.

Console (config)# 

interface tunnel

 1

Console (config-tunnel)# 

tunnel isatap router

 Dell_Tunnel_Router

book.book  Page 455  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды