Dell PowerConnect 3500 Series Скачать руководство пользователя страница 155

Страница: 155 / 538

DHCP Snooping

155

Example

The following example configures Ethernet port 1/e15 as trusted for DHCP snooping purposes.

ip dhcp snooping information option allowed-untrusted

The

ip dhcp snooping information option allowed-untrusted

Global Configuration mode command

configures a switch to accept DHCP packets with option-82 information from an untrusted port. Use the

form of this command to configure the switch to drop these packets from an untrusted port.

Syntax

•

ip dhcp snooping information option allowed-untrusted

•

no ip dhcp snooping information option allowed-untrusted

Default Configuration

The default configuration is to discard DHCP packets with option-82 information from an untrusted
port.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a switch to accept DHCP packets with option-82 information from an
untrusted port:.

ip dhcp snooping verify

The

ip dhcp snooping verify

Global Configuration mode command configures a switch to verify on an

untrusted port that the source MAC address in a DHCP packet matches the client hardware address.
Use the

form of this command to not verify the MAC addresses.

console(config)#

interface ethernet

1/e15

console(config-if)#

ip dhcp snooping trust

console(config)#

ip dhcp snooping information option allowed-

untrusted

book.book Page 155 Thursday, December 18, 2008 7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerConnect 3500 Series

Отзывы:

Бренды по названию

Популярные бренды

Dell PowerConnect 3500 Series, Справочное руководство CLI

Результаты поиска

Содержание PowerConnect 3500 Series

Отзывы:

Бренды по названию

Популярные бренды