manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 363

Spanning-Tree Commands

363

Command Mode 

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the spanning priority on Ethernet port 1/e15 to 96.

spanning-tree portfast

The 

spanning-tree portfast

 Interface Configuration mode command enables PortFast mode. In PortFast 

mode, the interface is immediately put into the forwarding state upon linkup without waiting for the 
standard forward time delay. Use the 

no

 form of this command to disable PortFast mode.

Syntax

•

spanning-tree portfast [auto]

•

no spanning-tree portfast

•

auto — Specifies that the software waits for 3 seconds (With no BPDUs received on the interface) 
before putting the interface into the PortFast mode.

Default Configuration

PortFast mode is disabled.

Command Mode 

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

This feature should be used only with interfaces connected to end stations. Otherwise, an accidental 
topology loop could cause a data packet loop and disrupt device and network operations.

Example

The following example enables PortFast on Ethernet port 1/e15

.

Console(config)# 

interface ethernet

 1/e15

Console(config-if)# 

spanning-tree port-priority

 96

Console(config)# 

interface ethernet

 1/e15

Console(config-if)# 

spanning-tree portfast

book.book  Page 363  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды