manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 282

282

Power over Ethernet Commands

Syntax

•

power inline powered-device 

pd-type

•

no power inline powered-device

•

pd-type — 

Specifies the type of powered device attached to the interface. (Range: 1 - 24 

characters)

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a description to an IP-phone to a powered device connected to 
Ethernet interface 1/e1.

power inline priority

The 

power inline priority 

Interface Configuration (Ethernet) mode command configures the inline 

power management priority of the interface. Use the 

no

 form of this command to return to the default 

configuration.

Syntax

•

power inline priority {critical | high | low}

•

no power inline priority

•

critical 

— 

Indicates that operating the powered device is critical.

•

high 

— 

Indicates that operating the powered device has high priority.

•

low

—

Indicates that operating the powered device has low priority.

Default Configuration

The default setting is low priority.

Console(config)# 

interface ethernet

 1/e1

Console(config-if)# 

power inline powered-device

 IP-phone

book.book  Page 282  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды