manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 105

Address Table Commands

105

bridge multicast unregistered

The 

bridge multicast unregistered

 Interface Configuration mode command configures the forwarding 

state of unregistered multicast addresses. Use the 

no

 form of this command to return to default.

Syntax

•

bridge multicast unregistered

 {

forwarding

 | 

filtering

}

•

no bridge multicast unregistered

•

forwarding

 — Forward unregistered multicast packets.

•

filtering

 — Filter unregistered multicast packets. See usage guidelines for the case where the port 

is a router port. 

Default Configuration

Forwarding

Command Modes

Interface configuration (Ethernet, Port-Channel) mode

Default Configuration

•

Unregistered multicast filtering should not be enabled on ports that are connected to routers, because 
the 224.0.0.x address range should not be filtered. Routers would not necessarily send IGMP reports 
for the 224.0.0.x range.

Examples

This example configures the forwarding state of unregistered multicast addresses to allow forwarding.

bridge multicast forward-all

The 

bridge multicast forward-all 

Interface Configuration (VLAN) mode command enables forwarding 

all Multicast packets on a port. Use the 

no

 form of this command to restore the default configuration.

Console (config)# 

bridge multicast unregistered forwarding

book.book  Page 105  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды