manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 392

392

SSH Commands

Default Configuration

Device configuration from a SSH server is enabled.

Command Mode

Global Configuration mode.

User Guidelines

•

If encryption keys are not generated, the SSH server is in standby until the keys are generated. To 
generate SSH server keys, use the 

crypto key generate dsa

, and 

crypto key generate rsa

 Global 

Configuration mode commands.

Example

The following example enables configuring the device from a SSH server.

crypto key generate dsa

The 

crypto key generate dsa

 Global Configuration mode command generates DSA key pairs.

Syntax

•

crypto key generate dsa

Default Configuration

DSA key pairs do not exist.

Command Mode

Global Configuration mode.

User Guidelines

•

DSA keys are generated in pairs: one public DSA key and one private DSA key. If the device already has 
DSA keys, a warning and prompt to replace the existing keys with new keys are displayed.

•

This command is not saved in the device configuration; however, the keys generated by this command 
are saved in the private configuration, which is never displayed to the user or backed up on another 
device. 

•

DSA keys are saved to the backup master.

•

This command may take a considerable period of time to execute.

Console(config)# 

ip ssh server

book.book  Page 392  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды