manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 164

164

Ethernet Configuration Commands

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Commands under the interface range context are executed independently on each active interface in 
the range. If the command returns an error on one of the active interfaces, it does not stop executing 
commands on other active interfaces.

Example

The following example shows how ports 5/e18 to 5/e20 and 3/e1 to 3/24 are grouped to receive the same 
command.

shutdown

The 

shutdown 

Interface Configuration (Ethernet, port-channel) mode command disables an interface. 

Use the 

no

 form of this command to restart a disabled interface.

Syntax

•

shutdown

•

no shutdown

Default Configuration

The interface is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

interface range ethernet

 5/e18-5/e20,3/e1-3/e24

Console(config-if)#

book.book  Page 164  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды