manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 426

426

System Management

Default Configuration

Disables forcing the selection of a stack master.

Command Mode

Global Configuration mode.

User Guidelines

•

The following algorithm is used to select a unit as the master: 

–

If only one master-enabled unit is in the stack (1 or 2), it becomes the master.

–

If a unit configured as a forced master, it becomes the master. 

If a forced master unit is removed from a stack and placed in a different stack with another forced 
master unit, both are considered to be forced, and the election criteria continue as follows: 

–

The unit with the longer up-time is elected master. Units are considered to have the same up-time 
if they were powered up within ten minutes of each other.

–

If both forced master units have the same up-time, Unit 1 is elected.

Example

The following example selects Unit 2 as the stack master.

stack reload

The 

stack reload

 Privileged EXEC mode command reloads stack members.

Syntax

•

stack reload

 [

unit

]

•

unit — 

Number of the unit to be reloaded (Range: 1 - 8)

Default Configuration

All units are reloaded.

Command Mode

Privileged EXEC mode.

User Guidelines

If no unit is specified, all units are reloaded.

Console(config)# 

stack master unit

 2

book.book  Page 426  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды