manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 474

474

VLAN Commands

Syntax

•

switchport trunk native vlan 

vlan-id

•

no switchport trunk native vlan

•

vlan-id 

— Specifies the ID of the native VLAN.

Default Configuration

VID=1.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

The command adds the port as a member in the VLAN. If the port is already a member in the VLAN 
(not as a native), it should be first removed from the VLAN. 

Example

The following example configures VLAN number 123 as the native VLAN when Ethernet port 1/e16 is in 
trunk mode.

switchport general allowed vlan

The 

switchport general allowed vlan 

Interface Configuration mode command adds or removes VLANs 

from a general port.

Syntax

•

switchport general allowed vlan add 

vlan-list 

[

tagged

 | 

untagged

]

•

switchport general allowed vlan remove 

vlan-list

•

add

 

vlan-list

 — Specifies the list of VLAN IDs to be added. Separate non-consecutive VLAN IDs 

with a comma and no spaces. A hyphen designates a range of IDs.

•

remove

 vlan-list

 — Specifies the list of VLAN IDs to be removed. Separate non-consecutive VLAN 

IDs with a comma and no spaces. A hyphen designates a range of IDs.

•

tagged

 — Indicates that the port transmits tagged packets for the VLANs.

•

untagged

 — Indicates that the port transmits untagged packets for the VLANs.

Console(config)# 

interface ethernet

 1/e16

Console(config-if)# 

switchport trunk native vlan

 123

book.book  Page 474  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды