manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 193

IGMP Snooping Commands

193

Example

The following example enables automatic learning of Multicast router ports on VLAN 2.

ip igmp snooping host-time-out

The 

ip igmp snooping host-time-out 

Interface Configuration (VLAN) mode command configures the 

host-time-out. If an IGMP report for a Multicast group was not received for a host-time-out period from 
a specific port, this port is deleted from the member list of that Multicast group. Use the 

no

 form of this 

command to return to the default configuration.

Syntax

•

ip igmp snooping host-time-out 

time-out

•

no ip igmp snooping host-time-out

•

time-out

 — Host timeout in seconds. (Range: 1 - 2147483647)

Default Configuration

The default host-time-out is 260 seconds.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

The timeout should be at least greater than 2*query_imax_response_time of the IGMP router.

Example

The following example configures the host timeout to 300 seconds.

ip igmp snooping mrouter-time-out

The 

ip igmp snooping mrouter-time-out 

Interface Configuration (VLAN) mode command configures 

the mrouter-time-out. The 

ip igmp snooping mrouter-time-out

 Interface Configuration (VLAN) mode 

command is used for setting the aging-out time after Multicast router ports are automatically learned. 
Use the 

no

 form of this command to return to the default configuration.

Console(config) # 

interface vlan 

2

Console(config-if)# 

ip igmp snooping mrouter learn-pim-dvmrp

Console(config)# 

interface vlan 

2

Console(config-if)# 

ip igmp snooping host-time-out

 300

book.book  Page 193  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды