manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 202

202

IP Addressing Commands

ip address dhcp

The 

ip address dhcp 

Interface Configuration (Ethernet, VLAN, port-channel) mode command acquires 

an IP address for an Ethernet interface from the Dynamic Host Configuration Protocol (DHCP) server. 
Use the 

no

 form of this command to deconfigure an acquired IP address.

Syntax

•

ip address dhcp

 [

hostname

 

host-name

]

•

no ip address dhcp

•

host-name

 — Specifies the name of the host to be placed in the DHCP option 12 field. This name 

does not have to be the same as the host name specified in the 

hostname

 Global Configuration 

mode command. (Range: 1-20 characters)

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, VLAN, port-channel) mode.

User Guidelines

•

The 

ip address dhcp

 command allows any interface to dynamically learn its IP address by using the 

DHCP protocol. 

•

Some DHCP servers require that the DHCPDISCOVER message have a specific host name. The 

ip 

address dhcp

 

hostname

 

host-name

 command is most typically used when the host name is provided by 

the system administrator.

•

If the device is configured to obtain its IP address from a DHCP server, it sends a DHCPDISCOVER 
message to provide information about itself to the DHCP server on the network.

•

If  the 

ip address dhcp

 command is used with or without the optional keyword, the DHCP option 12 

field (host name option) is included in the DISCOVER message. By default, the specified DHCP host 
name is the globally configured host name of the device. However, the 

ip address dhcp hostname

 

host-

name

 command can be used to place a different host name in the DHCP option 12 field.

•

The 

no ip address dhcp

 command deconfigures any IP address that was acquired, thus sending a 

DHCPRELEASE message. 

Example

The following example acquires an IP address for Ethernet port 1/e16 from DHCP.

Console(config)# 

interface ethernet

 1/e16

Console(config-if)# 

ip address dhcp

book.book  Page 202  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды