manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 342

342

SNMP Commands

Default Configuration

The engine ID is not configured.

If SNMPv3 is enabled using this command, and the default is specified, the default engine ID is defined 
per standard as:

•

First 4 octets — first bit = 1, the rest is IANA Enterprise number = 674.

•

Fifth octet — set to 3 to indicate the MAC address that follows.

•

Last 6 octets — MAC address of the device.

Command Mode

Global Configuration mode.

User Guidelines

•

To use SNMPv3, you have to specify an engine ID for the device. You can specify your own ID or use a 
default string that is generated using the MAC address of the device.

•

If the SNMPv3 engine ID is deleted or the configuration file is erased, SNMPv3 cannot be used. By 
default, SNMPv1/v2 are enabled on the device. SNMPv3 is enabled only by defining the Local Engine 
ID. 

•

If you want to specify your own ID, you do not have to specify the entire 32-character engine ID if it 
contains trailing zeros. Specify only the portion of the engine ID up to the point where just zeros 
remain in the value. For example, to configure an engine ID of 123400000000000000000000, you can 
specify snmp-server engineID local 1234. 

•

Since the engine ID should be unique within an administrative domain, the following is 
recommended:

–

For a standalone device, use the default keyword to configure the engine ID.

–

For a stackable system, configure the engine ID to be used for the entire stack, and verify that the 
stack engine ID is unique throughout the entire management network.

•

Changing the value of the engine ID has the following important side-effect. A user's password 
(entered on the command line) is converted to an MD5 or SHA security digest. This digest is based on 
both the password and the local engine ID. The user’s command line password is then destroyed, as 
required by RFC 2274. As a result, the security digests of SNMPv3 users become invalid if the local 
value of the engine ID change, and the users will have to be reconfigured.

•

You cannot specify an engine ID that consists of all 0x0, all 0xF or 0x000000001.

•

The 

show running-config

 Privileged EXEC mode command does not display the SNMP engine ID 

configuration. To see the SNMP engine ID configuration, enter the 

snmp-server engineID local

 

Global Configuration mode command.

book.book  Page 342  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды