manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 517

802.1x Commands

517

Syntax

•

dot1x port-control 

{

auto

 | 

force-authorized

 | 

force-unauthorized

} 

•

no dot1x port-control

 

•

auto — 

Enables 802.1X authentication on the interface and causes the port to transition to the 

authorized or unauthorized state based on the 802.1X authentication exchange between the port 
and the client.

•

force-authorized — 

Disables 802.1X authentication on the interface and causes the port to 

transition to the authorized state without any authentication exchange required. The port resends 
and receives normal traffic without 802.1X-based authentication of the client.

•

force-unauthorized — 

Denies all access through this interface by forcing the port to transition to 

the unauthorized state and ignoring all attempts by the client to authenticate. The device cannot 
provide authentication services to the client through the interface.

Default Configuration

Port is in the force-authorized state.

Command Mode 

Interface Configuration (Ethernet) mode.

User Guidelines

•

It is recommended to disable Spanning Tree or to enable spanning-tree PortFast mode on 802.1x edge 
ports (ports in 

auto

 state that are connected to end stations), in order to get immediately to the 

forwarding state after successful authentication. 

Examples

The following example enables 802.1X authentication on Ethernet port 1/e16.

dot1x re-authentication

The 

dot1x re-authentication

 Interface Configuration mode command enables periodic 

re-authentication of the client. Use the 

no

 form of this command to return to the default configuration.

Syntax

•

dot1x re-authentication 

•

no dot1x re-authentication

 

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x port-control auto

book.book  Page 517  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды