manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 30

30

Using the CLI

3

Configure the device and enter the necessary commands to complete the required tasks. 

4

When finished, exit the session with the 

exit

 command.

When a different user is required to log onto the system, use the 

login

 Privileged EXEC mode 

command. This effectively logs off the current user and logs on the new user.

Editing Features

Entering Commands

A CLI command is a series of keywords and arguments. Keywords identify a command, and arguments 
specify configuration parameters. For example, in the command 

show interfaces status ethernet 1/e11

, 

show, interfaces

 and 

status

 are keywords, 

ethernet

 is an argument that specifies the interface type, and 

1/e11

 specifies the port.

To enter commands that require parameters, enter the required parameters after the command keyword. 
For example, to set a password for the administrator, enter:

Console(config)# 

username 

admin

 password 

alansmith

When working with the CLI, the command options are not displayed. The command is not selected 
from a menu, but is manually entered. To see what commands are available in each mode or within an 
interface configuration, the CLI provides a method of displaying the available commands, the command 
syntax requirements and in some instances, parameters required to complete the command. The 
standard command to request help is the character 

?

.

There are two instances where help information can be displayed:

•

Keyword lookup

 — The character 

?

 is entered in place of a command. A list of all valid commands and 

corresponding help messages are is displayed.

•

Partial keyword lookup

 — If a command is incomplete and or the character

 ?

 is entered in place of a 

parameter. The matched keyword or parameters for this command are displayed.

To assist in using the CLI, there is an assortment of editing features. The following features are 
described:

•

Terminal Command Buffer

•

Command Completion

•

Keyboard Shortcuts

Copying and Pasting Text

Up to 100 lines of text (i.e., commands) can be copied and pasted into the device.

 

NOTE: 

This editing features are for Telnet only.

 

NOTE: 

It is the user’s responsibility to ensure that the text copied into the device consists of legal commands only.

book.book  Page 30  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды