manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 106

106

Address Table Commands

Syntax

•

bridge multicast forward-all 

{

add 

| 

remove

}

 

{

ethernet

 

interface-list 

|

 port-channel 

port-channel-

number-list

}

•

no bridge multicast forward-all

•

add

 — Force forwarding all Multicast packets.

•

remove

 — Do not force forwarding all Multicast packets.

•

interface-list

 — Separate non-consecutive Ethernet ports with a comma and no spaces; a hyphen is 

used to designate a range of ports.

•

port-channel-number-list

 — Separate non-consecutive port-channels with a comma and no spaces; 

a hyphen is used to designate a range of port-channels.

Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example forwards all Multicast packets on port 1/e8. 

bridge multicast forbidden forward-all

The 

bridge multicast forbidden forward-all 

Interface Configuration (VLAN) mode command forbids 

a port to be a forward-all-Multicast port. Use the 

no

 form of this command to restore the 

default configuration.

Console(config)# 

interface vlan 2

Console(config-if)# 

bridge multicast forward-all add

ethernet 

1/e8

book.book  Page 106  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды