manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 142

142

Configuration and Image Files

Default Configuration

This command has no default configuration.

Command Mode

Privileged

 

EXEC mode.

User Guidelines

•

The location of a file system dictates the format of the source or destination URL.

•

The entire copying process may take several minutes and differs from protocol to protocol and 
from network to network.

Understanding Invalid Combinations of Source and Destination

Some invalid combinations of source and destination exist. Specifically, the following cannot be 
copied:

•

If the source file and destination file are the same file.

•

xmodem

 cannot be a destination.

 

Can only be copied to 

image

, 

boot

 and 

null

.

•

tftp

 cannot be the source and destination on the same copy.

•

*.prv files can't be copied.

•

Copy to or from the slave units is for image and boot files only.

The following table describes copy characters:

Copying image file from a Server to Flash Memory

Use the 

copy source-url image

 

command to copy an image file from a server to Flash memory.

Copying boot file from a Server to Flash Memory

Use the 

copy source-url boot

 

command to copy a boot file from a server to Flash memory.

Copying a Configuration File from a Server to the Running Configuration

backup-config

Represents the backup configuration file.

unit:

//

member

/ 

backup-config

Backup configuration file on one of the units.

logging

Copy from a syslog file.

Character

Description

!

For network transfers, indicates that the copy process is taking place. Each 
exclamation point indicates successful transfer of ten packets (512 bytes each). 

.

For network transfers, indicates that the copy process timed out. Generally, many 
periods in a row means that the copy process may fail.

book.book  Page 142  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды