manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 107

Address Table Commands

107

Syntax 

•

bridge multicast forbidden forward-all 

{

add 

| 

remove

}

 

{

ethernet

 

interface-list 

| 

port-channel 

port-

channel-number-list

}

•

no bridge multicast forbidden forward-all

•

add

 — Forbids forwarding all Multicast packets.

•

remove

 — Does not forbid forwarding all Multicast packets.

•

interface-list

 — Separates non-consecutive Ethernet ports with a comma and no spaces; a hyphen 

is used to designate a range of ports.

•

port-channel-number-list

 — Separates non-consecutive port-channels with a comma and no 

spaces; a hyphen is used to designate a range of port-channels.

Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

•

IGMP snooping dynamically discovers Multicast router ports. When a Multicast router port is 
discovered, all the Multicast packets are forwarded to it unconditionally.

•

This command prevents a port from becoming a Multicast router port.

Example

The following example forbids forwarding all Multicast packets to 1/e1 with VLAN 2.

bridge aging-time

The 

bridge aging-time 

Global Configuration mode command sets the Address Table aging time. Use the 

no

 form of this command to restore the default configuration.

Syntax

•

bridge aging-time 

seconds

•

no bridge aging-time

•

seconds

 — Time in seconds. (Range: 10 - 630 seconds)

Console(config)# 

interface vlan

 2

Console(config-if)# 

bridge multicast forbidden forward-all add 

ethernet 

1/e1

book.book  Page 107  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды