manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 480

480

VLAN Commands

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

Use this command to override the FDB decision, and forward the packet to the uplink. Please note that 
the packet is still subject to all filtering decisions.

The following example overrides the FDB decision, and sends all the Unicast, Multicast and Broadcast 
traffic to specified ethernet port.

map protocol protocols-group

The 

map protocol protocols-group

 VLAN Configuration mode command maps a protocol to a protocol 

group. Protocol groups are used for protocol-based VLAN assignment. Use the 

no

 form of this command 

to delete a protocol from a group.

Syntax

•

map protocol 

protocol 

[

encapsulation

] 

protocols-group 

group

•

no map protocol 

protocol

 

encapsulation

•

protocol

 — The protocol is a 16 or 40 bits protocol number or one of the following names, 

ip, ipx 

or

 arp

. The protocol number is in Hex format (Range: 0600 - FFFF).

•

encapsulation

 — One of the following values: 

ethernet or protocols-group

. If no option is 

indicated the default is 

ethernet

.

•

group

 — Protocol group number. (Range: 1 - 2147483647)

Default Configuration

This command has no default configuration.

Command Mode

VLAN Configuration mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

interface ethernet

 1/e5

Console(config-if)# 

switchport protected ethernet

 2/g1

book.book  Page 480  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды