manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 344

344

SNMP Commands

Syntax

•

snmp-server filter

 

filter-name oid-tree

 {

included | excluded

}

•

no snmp-server filter 

filter-name

 [

oid-tree

]

•

filter-name

 — Specifies the label for the filter record that is being updated or created. The name is 

used to reference the record. (Range: 1 - 30 characters)

•

oid-tree

 — Specifies the object identifier of the ASN.1 subtree to be included or excluded from the 

view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a 
word, such as system. Replace a single sub identifier with the asterisk (*) wildcard to specify a 
subtree family; for example, 1.3.*.4. You may also identify the subtree by specifying its logical 
name; for example, "IfEntry.*.1".

•

included

 — Indicates that the filter type is included.

•

excluded

 — Indicates that the filter type is excluded.

Default Configuration

No filter entry exists.

Command Mode

Global Configuration mode.

User Guidelines

This command can be entered multiple times for the same filter record. Later lines take precedence 
when an object identifier is included in two or more lines.

Examples

The following example creates a filter that includes all objects in the MIB-II system group except for 
sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group.

snmp-server host

The 

snmp-server host 

Global Configuration mode command specifies the recipient of Simple Network 

Management Protocol Version 1 or Version 2 notifications. Use the 

no

 form of this command to remove 

the specified host.

Console(config)# 

snmp-server filter

 filter-name system 

included

Console(config)# 

snmp-server filter

 filter-name system.7 

excluded

Console(config)# 

snmp-server filter

 filter-name ifEntry.*.1 

included

book.book  Page 344  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды