manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 32

32

Using the CLI

Command Completion

An appropriate error message displays if the entered command is incomplete or invalid; or has missing or 
invalid parameters. This assists in entering the correct command.

Keyboard Shortcuts

The CLI has a range of keyboard shortcuts to assist in editing the CLI commands. The following table 
describes the CLI shortcuts.

CLI Command Conventions

When entering commands there are certain command entry standards that apply to all commands. 
The following table describes the command conventions.

Keyboard Key

Description

Up-arrow key

Recalls commands from the history buffer, beginning with the most recent command. 
Repeat the key sequence to recall successively older commands.

Down-arrow key

Returns the most recent commands from the history buffer after recalling commands with 
the up arrow key. Repeating the key sequence will recall successively more recent 
commands.

Ctrl+A

Moves the cursor to the beginning of the command line.

Ctrl+E

Moves the cursor to the end of the command line.

Ctrl+Z / End

Returns back to the Privileged EXEC mode from any configuration mode.

Backspace key

Deletes one character left to the cursor position.

Convention

Description

[ ]

In a command line, square brackets indicate an optional entry.

{ }

In a command line, curly brackets indicate a selection of compulsory parameters separated by 
the | character. One option must be selected. For example, 

flowcontrol {auto|on|off}

 means 

that for the 

flowcontrol

 command either 

auto

, 

on

 or 

off

 must be selected.

Italic font

Indicates a parameter.

<Enter> 

Indicates an individual key on the keyboard. For example, <Enter> indicates the 

Enter

 key.

Ctrl+F4

Any combination of keys pressed simultaneously on the keyboard.

Screen 

Display

Indicates system messages and prompts appearing on the console.

all

When a parameter is required to define a range of ports or parameters and 

all

 is an option, the 

default for the command is 

all

 when no parameters are defined. For example, the command 

interface range port-channel 

has the option of either entering a range of channels, or selecting 

all

. When the command is entered without a parameter, it automatically defaults to 

all

.

book.book  Page 32  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды