manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 497

Voice VLAN

497

User Guidelines

The port is added to the voice VLAN if a packet with a

 telephony 

MAC address source MAC address 

(defined by the voice vlan oui-table global configuration command) is trapped on the port. 

 

NOTE: 

The VLAN ID of the packet can be the voice VLAN ID or any other VLAN. The port joins the voice VLAN as a 

tagged port. If the time since the last telephony MAC addressed MAC address ages out exceeds the timeout limit 
(configured by the voice vlan aging-timeout global configuration command), the port is removed from the voice VLAN.

Example

The following example enables automatic voice VLAN configuration for a port

voice vlan secure

The 

voice vlan secure

 Interface Configuration mode command configures the secure mode for the voice 

VLAN. Use the 

no 

form of this command to disable the secure mode. 

Syntax

•

voice vlan secure

•

no voice vlan secure

Default Configuration

Not secured.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

•

Use this command to specify that packets classified to the voice VLAN with a 

non- telephony

 MAC 

address source MAC address (defined by the 

voice vlan oui-table

 global configuration command) are 

discarded.

•

This command is relevant only to ports added to the voice VLAN automatically.

Example

The following example configures the current port in security mode. See User Guidlines.

console(config-if)# 

voice vlan enable

console(config-if)# 

voice vlan secure

book.book  Page 497  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды