manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 133

Clock

133

Syntax

•

sntp client enable 

{

ethernet

 

interface-number 

| 

vlan

 

vlan-id

 | 

port-channel

 

number

}

•

no sntp client enable

 {

ethernet

 

interface-number 

| 

vlan

 

vlan-id

 | 

port-channel

 

number

}

•

ethernet

 

interface-number 

— Ethernet port number.

•

vlan

 

vlan-id 

— VLAN number.

•

port-channel

 

number

 — Port channel number.

Default Configuration

Disabled.

Command Mode

Global Configuration mode.

User Guidelines

•

Use the 

sntp Broadcast client enable

 Global configuration command to enable Broadcast clients 

globally.

•

Use the 

sntp Anycast client enable

 Global configuration command to enable Anycast clients globally.

Examples

The following example enables the SNTP client on the interface. 

sntp client enable (Interface)

The

 sntp client enable 

Interface Configuration (Ethernet, port-channel, VLAN) mode command 

enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive 
Broadcast and Anycast updates. Use the 

no

 form of this command to disable the SNTP client.

Syntax

•

sntp client enable

•

no sntp client enable

Default Configuration

The SNTP client is disabled on an interface.

Command Mode

Interface configuration (Ethernet, port-channel, VLAN) mode.

Console (config)# 

sntp client enable

book.book  Page 133  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды