manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 184

184

GVRP Commands

Syntax

•

gvrp enable

•

no gvrp enable

Default Configuration

GVRP is disabled on all interfaces.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

•

An access port does not dynamically join a VLAN because it is always a member in only one VLAN.

•

Membership in an untagged VLAN is propagated in the same way as in a tagged VLAN. That is, the 
PVID is manually defined as the untagged VLAN VID.

Example

The following example enables GVRP on Ethernet port 1/e6.

garp timer

The 

garp timer

 Interface Configuration (Ethernet, Port channel) mode command adjusts the values of 

the join, leave and leaveall timers of GARP applications. Use the 

no

 form of this command to return to 

the default configuration.

Syntax

•

garp timer

 {

join

 | 

leave

 | 

leaveall

} 

timer_value

•

no garp timer

•

{

join

 | 

leave

 | 

leaveall

} — Indicates the type of timer.

•

timer_value — 

Timer values in milliseconds in multiples of 10. (Range: 10 - 2147483647)

Default Configuration

Following are the default timer values:

•

Join timer — 200 milliseconds

•

Leave timer — 600 milliseconds

•

Leavall timer — 10000 milliseconds

Console(config)# 

interface ethernet 

1/e6

Console(config-if)# 

gvrp enable

book.book  Page 184  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды