manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 229

IPv6 Addressing

229

show ipv6 neighbors

The 

show ipv6 neighbors

 Privileged EXEC mode command displays IPv6 neighbor discovery cache 

information.

Syntax

•

show ipv6 neighbors

 {

static

 | 

dynamic

}[

ipv6-address

 

ipv6-address

] [

mac-address

 

mac-address

]

•

static

 — Display static neighbor discovery cash entries.

•

dynamic

 — Display dynamic neighbor discovery cash entries.

•

ipv6-address

 — Display the neighbor discovery cache information entry of a specific IPv6 address.

•

mac-address

 — Display the neighbor discovery cache information entry of a specific MAC address.

Command Mode

Privileged EXEC mode.

User Guidelines

•

The associated interface of a MAC address can be aged out from the FDB table, so the Interface field 
can be empty.

•

When an ARP entry is associated with an IP interface that is defined on a port or port-channel, the 
VLAN field is empty.

•

The possible neighbor cash states are:

INCMP 

(Incomplete) — Address resolution is being performed on the entry. Specifically, a Neighbor 

Solicitation has been sent to the solicited-node multicast address of the target, but the corresponding 
Neighbor Advertisement has not yet been received.

REACH

 (Reachable) — Positive confirmation was received within the last ReachableTime 

milliseconds that the forward path to the neighbor was functioning properly. While REACHABLE, no 
special action takes place as packets are sent.

STALE

 — More than ReachableTime milliseconds have elapsed since the last positive confirmation 

was received that the forward path was functioning properly. While stale, no action takes place until a 
packet is sent.

DELAY

 — More than ReachableTime milliseconds have elapsed since the last positive confirmation 

was received that the forward path was functioning properly, and a packet was sent within the last  
DELAY_FIRST_PROBE_TIME seconds. If no reachability confirmation is received within 
DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, a Neighbor Solicitation is sent 
and the state is changed to PROBE.

PROBE

 — A reachability confirmation is actively sought by retransmitting Neighbor Solicitations 

every RetransTimer milliseconds until a reachability confirmation is received.

book.book  Page 229  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды