manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 226

226

IPv6 Addressing

•

If the link-local address for an interface changes, duplicate address detection is performed on the new 
link-local address and all of the other IPv6 address associated with the interface are regenerated 
(duplicate address detection is performed only on the new link-local address).

•

Until DAD process is completed, an IPv6 address is in tentative state and can not be used for data 
transfer. It is recommended to limit the configured value.

Example

The following example configures the number of consecutive neighbor solicitation messages that are 
sent on an interface while duplicate address detection is performed on the unicast IPv6 addresses of the 
interface to 10.

ipv6 host

The 

ipv6 host

 Global Configuration mode command defines a static host name-to-address mapping in 

the host name cache. Use the 

no

 form of this command to remove the host name-to-address mapping.

Syntax

•

ipv6 host

 

name ipv6-address1

 [

ipv6-address2

...

ipv6-address4

]

•

no

 ipv6 host name

•

name

 — Name of the host. (Range: 1 - 158 characters)

•

ipv6-address1

 — Associated IPv6 address. The address is specified in hexadecimal using 16-bit 

values between colons. When the IPv6 address is a Link Local address (IPv6Z address), the 
outgoing interface name must be specified. Refer to the usage guidelines for the interface name 
syntax.

•

ipv6-address2-4

 (optional) — Addition IPv6 addresses that may be associated with the host’s name

Default Configuration

No host is defined.

Command Mode

Global Configuration mode.

Console# Console (config)# 

interface

 g1

Console (config-if)# 

ipv6 nd dad attempts

 10

book.book  Page 226  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды