manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 341

SNMP Commands

341

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode.

User Guidelines

•

If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user.

•

When a 

show running-config

 Privileged EXEC mode command is entered, a line for this user will not 

be displayed. To see if this user has been added to the configuration, type the 

show snmp users

 

Privileged EXEC mode command.

•

An SNMP EngineID has to be defined to add SNMP users to the device. Changing or removing the 
SNMP EngineID value deletes SNMPv3 users from the device’s database.

•

The remote engineid designates the remote management station and should be defined to enable the 
device to receive informs.

Examples

The following example configures an SNMPv3 user 

John 

in group 

user-group

.

snmp-server engineID local

The 

snmp-server engineID local

 Global Configuration mode command specifies the Simple Network 

Management Protocol (SNMP) engineID on the local device. Use the 

no

 form of this command to 

remove the configured engine ID.

Syntax

•

snmp-server engineID local

 {

engineid-string

 |

 default

}

•

no snmp-server engineID local

•

engineid-string

 — Specifies a character string that identifies the engine ID. (Range: 9 - 64 hexa 

characters)

•

default

 — The engine ID is created automatically based on the device MAC address.

Console(config)# 

snmp-server user

 John user-group

book.book  Page 341  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды